Paratech Industries

• First and the last pulse equally usable.
• Marking are permanent with high abrasion resistance.
• High precision, fasten speed, consistent marking quality.
• Exceptional beam quality result into sharp and minuscule marking.
• Greater than 1,00,000 hours of maintenance-free operation.
• Real-time visible live pointer for preview your mark.
• User-friendly interface, easy operation.

Param Engineering produces a wide range of industrial laser marking/engraving machines for various product identification. With our miscellaneous set of products, we can provide the perfect-fit solution for any application, material, surface, and composition.
Features:Compact size & Portable Machine design
In-built air cooled laser source (no extra chiller required)High reliability, Long life working
Low power consumption & maintenance-free
Real time preview ensures accurate positioning
Compatible for marking, engraving and scribing operations
User friendly software
Compatible with bitmap format (BMP, JPEG) and vector graphics (PLT, DXF)High speed engraving and marking
Perfect beam quality
Status monitoring and safe shutdown
Support customized automation as per requirement
Advantages:Low Power Consumption: Fiber laser is more economized and environmental
It consumes very low power, for 30w only 1.2 kw/hour. While Diode is 3 KW/Hour and YAG is 5 KW/Hour
Best Marking Effect: Extremely sharp laser beam profile
It can provide the best marking effect among all the laser machines
Especially, good in smallest character marking, such as mark on IC chip
Higher Accuracy: Fiber laser can reach up to 0.001 mm precision, while diode only 0.01 mm
Deep Marking: Fiber laser can make deep marking up to 10 mm on wood and plastics
So it's suitable for the industries which has high requirement to the depth and accuracy
Specifications:
Speed: 0-9000 mm/s
Voltage: 220-260V
Power: 30-40kW

Laser Type : EFR Co2  Laser Tube

Average Output Power : 60 W (Optional 80/100 W)

Wavelength : 10.6μm

Output Power Stability (Typical) : 5%

Power Adjusting Range : 1 ~ 100 %

Resolution Frequency : 20-500 KHz (Optional)

Beam Quality (M²) : <1.6

Output Beam Diameter (1/e2) : 6-9 mm

Max. Linear Speed : Max 12000 mm/s

Marking Depth : 0.01~0.3 mm (Material Depended)

Work Area : 100mm x100 mm (Optional 300mm/400mm)

• Speed: 0-9000 mm/s
• Voltage: 220-260V
• Power: 30-40kW

Param Engineering produces a wide range of industrial laser marking/engraving machines for various product identification. With our miscellaneous set of products, we can provide the perfect-fit solution for any application, material, surface, and composition.Features:Compact size & Portable Machine designIn-built air cooled laser source (no extra chiller required)High reliability, Long life workingLow power consumption & maintenance-freeReal time preview ensures accurate positioningCompatible for marking, engraving and scribing operationsUser friendly softwareCompatible with bitmap format (BMP, JPEG) and vector graphics (PLT, DXF)High speed engraving and markingPerfect beam qualityStatus monitoring and safe shutdownSupport customized automation as per requirementAdvantages:Low Power Consumption: Fiber laser is more economized and environmentalIt consumes very low power, for 30w only 1.2 kw/hour. While Diode is 3 KW/Hour and YAG is 5 KW/HourBest Marking Effect: Extremely sharp laser beam profileIt can provide the best marking effect among all the laser machinesEspecially, good in smallest character marking, such as mark on IC chipHigher Accuracy: Fiber laser can reach up to 0.001 mm precision, while diode only 0.01 mmDeep Marking: Fiber laser can make deep marking up to 10 mm on wood and plasticsSo it's suitable for the industries which has high requirement to the depth and accuracy
Specifications:Speed: 0-9000 mm/sVoltage: 220-260VPower: 30-40kW

Laser Type : EFR Co2 Glass Laser Tube

Average Output Power : 60 W (Optional 80/100/130/150 W)

Output Power Stability (Typical) : 5%

Power Adjusting Range : 1  100 %

Beam Quality (M) : <1.6

Output Beam Diameter (1/e2) : 6-9 mm

Marking Depth : 0.01 0.3 mm (Material Depended)

Work Area : 3X4 FEET

Average Output Power : 60 W (Optional 80/100/130/150 W)

Output Power Stability (Typical) : 5%

Power Adjusting Range : 1  100 %

Beam Quality (M) : <1.6

Output Beam Diameter (1/e2) : 6-9 mm

Marking Depth : 0.01 0.3 mm (Material Depended)

Work Area : 3X4 FEET

• Speed: 0-9000 mm/s
• Voltage: 220-260V
• Power: 30-40kW